CSP4 Tuning for 2013-2018 Cummins - King

CSP4 Tuning for 2013-2018 Cummins - King

SPADE 499.33 jpg

LML SPADE - LML Tuning

King - SPADE - CSP4 Tuning - 2013-2018

500+HP King - SPADE - CSP5 Tuning - 2013-2018

Big Power, No smoke, You have to drive this power to believe it! 

From $549.00

To $1,503.00

In stock

SKU
kingspadecsp2013-p
Customize King - SPADE - CSP4 Tuning - 2013-2018
CSP4 Tuning- 2013-2018 - King   + $549.00

Maximum 17 characters

* Required Fields

Your Customization
King - SPADE - CSP4 Tuning - 2013-2018
King - SPADE - CSP4 Tuning - 2013-2018

In stock

$549.00

Summary

    To get 500+RWHP out of your 6.7L Cummins, there's no need to pull your exhaust.  We can get the power, mileage, and torque benefits of tuning that most other shops want to sacrifice your exhaust and any chance of your warranty for.  At CPS, we specialize in engineering high power calibrations that work in harmony with the factory emissions control systems.  Our calibrations process is time and labor intensive, but the results are worth it if you're using your truck daily and appreciate clean quiet operation.  

    -With our tuning the truck emits zero particulate (black smoke)

    -Makes 500+ RWHP and 1100+ ft-lbs of torque

    -Shifts firm and locks the torque converter up to take advantage of the 6.7L's wide torque curve (*TCM tuning mandatory on 68rfe King Tune)

    -Improves mileage by wasting less energy in hydraulic torque converter operation

    -Does not smoke on cold start

    -Does not smell like diesel fuel

    -Does not drone in the cab at any RPM while towing

    -Does not make you a target for DOT and law enforcement

    -Allows you to go back to stock with a simple reflash

    The King tuning level offers 4 tunes ranging in power from 40HP over stock to 160HP over stock

    Tune 1 (+40HP 80ft-lbs): A tune designed for heavy towing use. Our goal with this tune is to give you as much extra power and torque as we can offer while keeping the powertrain safe for towing at max capacity.  We calibrate around sustained EGT of 1250*.

    Tune 2 (+60HP 120ft-lbs): A tune designed for light towing use (8K lb trailer and lighter). Our goal with this tune is to give you as much extra power and torque as we can offer while keeping the powertrain safe for towing at light and medium capacity.  We calibrate around sustained EGT of 1250*.

    Tune 3 (+110HP 180 ft-lbs): A tune designed for daily driving, and great mileage. Our goal with this tune is to give you a tune that's fun drive unloaded every day.  Improved throttle response, good low end feel and crisp shifts.  We balance fun and mileage with long term driveline and emissions system reliability.  

    Tune 4 (+160HP 300ft-lbs):  Serious increase in power and torque.  It feels like a totally different truck at this time.  This tune will put you just over 500rwhp and 1100ft-lbs on a stock fuel system and turbocharger.  We're talking about a truck that's a riot to drive and puts out zero smoke even at full tilt.  To run this power level you'll need to add some hard parts to your transmission which will allow our TCM tuning to reach it's full potential.  (See below)

    Includes:

    SPADE Programmer - Hardware that allows tune flashing, tune switching, read/clear of diagnostic trouble codes, and data logging

    CSP4 tune - Calibration that includes the tunes listed above

    CPS Service pack - Email and phone support as needed anytime between 9-5 cst M-F we're here to answer the phone or respond by email

    Write Your Own Review
    You're reviewing:King - SPADE - CSP4 Tuning - 2013-2018