Optimized Stock ECM / TCM Tuning Incl. Hardware & Credits L5P (2017-2019)
Our custom Light Tow tune is the safest way for those who tow recreational vehicles and other smaller payloads with your 2017, 2018, 2019 Chevy Silverado or GMC Sierra. What's light? Under 8,000 lbs. Our fine tuned calibrations expertly optimize for power, torque, smoke, vehicle reliability and better fuel consumption. Using the Light Tow tune with payload over 8,000 lbs could have slightly higher EGTs if the situation is strenuous to the truck (pulling a huge trailer up a steep mountain pass in the middle of the desert during summer). ECM & TCM Tuners, Hardware and Credits included.
As low as $4,147.88
In stock
Our Light Tow Custom Tune
- Emissions Intact – you do not remove your emissions equipment
- Balance between Daily Driving and Light Towing
- Smooth power curve that’s fun to drive
- Custom “SMART EGT Control” will automatically manage your EGTs
- Wake your truck up and get the power you paid for
- Air:Fuel Ratio limits built into calibration to limit soot production
- Designed to tow less than 8,000 lbs.
- Factory turbo brake retains complete functionality
- Horsepower & Torque Increase
- +55 RWHP, +99 ft-lbs
- Get your truck up and moving more quickly
- More useable power in all driving scenarios
- Have enough power to “Shift Up, Throttle Back”
- Revised pedal sensitivity
- Low speed trailer maneuvering
- Back up with trailer without lurching
- Custom Tuning from DuramaxTuner.com
- Fully customized tuning with more than 100+ calibration changes from stock
- No hacking wires into control units or fuel pump and turbo sensors
- More power and less soot than box programmers
- World Class Customer Service team that actually answers the phone!
Who Benefits from this Tune?
- Tows Seasonally
- Small boat in the summer
- UTV, ATV, Snowmobiles, Motorcycles, Car trailer
- Drives truck every day to work
- Landscapers, home repair, roofing, labor contractors
- Fleet/service vehicles that are loaded down and heavy with equipment
- Wants to tow 8,000 lbs. or less without having to worry about reliability
- Use our Heavy Tow tune if you intend to tow more than 8,000 lbs to GVW
- Better yet, get all five custom tunes with Switch on the Fly
Included Hardware
Modified ECM Included (Engine Control Module)
- We stock modified ECM hardware and ship directly to you
- Remove your factory ECM and replace with our Modified ECM
- Flash our custom tunes using the RTD Hardware and required HP Tuners Credits
MPVI3 Hardware by HP Tuners Included
- Connect > Read > Edit > Write > Drive.
- Equipped with Bluetooth®, Proprietary Expansion Port, and Mobile Device Support
- Makes it faster and easier to read, edit, and write your vehicle’s software.
- VCM Editor and VCM Scanner and programming/USB cables, making up the essentials of VCM Suite - one of the most powerful and inclusive scanning, diagnostic, logging and calibration products on the market.
- Full support for our latest rendition of Track Addict - the fastest scanning, logging and data transmission rates to ensure you capture everything.
- VCM Scanner, the most powerful and comprehensive scan tool on the market.
- View, chart, and log diagnostic data in real-time via the OBDII diagnostic data port.
- View and clear Diagnostic Trouble Codes (DTCs) along with other vehicle module information. Command control functions like a closed loop, fans, gear select, timing, air-fuel ratio and so much more all in real-time.
HP Tuners Universal Credits Included
- 8 credits required for ECM tuning
Modified TCM Included (Transmission Control Module)
- We stock modified TCM hardware and ship directly to you
- Remove your factory TCM and replace with our Modified TCM
- Flash our custom transmission tune using the RTD Hardware and required HP Tuners Credits
- Ship us your factory TCM; we will refund you $200 when confirmed in working order
HP Tuners Universal Credits Included
- 4 credits required for TCM tuning
Recommended Options
Transmission Tuning
-
6 Speed Allison TCM Tuning
The 6-Speed Allison found in your 2017-2019 L5P Duramax earned its reputation for excellence largely because of the advanced electronic control provided by the TCM (Transmission Control Module). Changing that factory calibration is especially important for you when you modify your truck and/or install ECM Tuning. Custom TCM Tuning gives you quicker shifts, smoother operation and an overall a better driving experience.
Why do you need TCM Tuning?
- Works with ECM Tuning to provide smooth shifting and superior drive-ability
- Torque converter lockup strategy helps you put power to the ground when you need it the most
- Improve clutch holding capacity with increased line pressure
- Makes your truck feel more powerful
- Prevents short-shifting in performance applications
- TCM Tuning in the best tool to ensure your engine is operating within its preferred rev range
TCM Tuning is especially important for trucks with:
- Custom ECM Tuning
- Larger tires (35”+)
- Modified turbo(s)
- Built transmission
- Any modification that impacts operating RPMs
Towing & Performance
- Use the wider torque curve provided by ECM Tuning
- Keep your truck in its power-band when lugging up a grade
- Quicker shifts mean less time between gears and more time putting power to the ground
- Optimize your aftermarket performance parts