CMC +45% Exergy New Injectors (set of 6)
Exergy Performance +45% injectors appropriate if you have already upgraded (or plan to) your transmission, high-pressure fuel pump (CP3), drop-in turbocharger, custom tuning, and have installed supporting mods like traction bars, cold air intake, low pressure fuel pump, and intercooler piping. If this is too much, consider our +30% injectors. For your 6.7L CMC RAM 2500-5500 truck. Model years 2007, 2008, 2009. You should modify your tuning when you add these injectors.
As low as $4,218.00
In stock
CMC +45% Exergy Injectors (set of 6)
This the perfect injector upgrade if you are looking to make 700hp (more than we suggest for your stock bottom end). You’ll have total peace of mind running the most reliable and consistent injectors ever offered for your CMC. From the top competitors in the industry to over-the-road hot shot drivers, diesel truck owners love Exergy Performance Injectors.
Why buy Exergy Performance +45% Injectors?
- Replace Stock or failed CMC Injectors
- You’ve installed (or plan to)
- Built Transmission
- Drop-In Turbo
- Lift Pump
- 10mm, 12mm, or Dual Cp3
- Custom Tuning
- Traction Bars
- Cold Air Intake
- Intercooler Piping
- Up 700hp (with supporting mods) without causing smoke
- You should re-tune your vehicle after installation · Too much? Consider our +30% injectors for less mods
Benefits of Exergy Performance +45% Over Injectors
- Exergy Performance: Top quality, high performance, most reliable
- The only company we trust to modify injectors
- Bosch equipment design & development for diesel common rail
- Thorough verification & testing including shot-to-shot consistency and injection timing
- Full test results of your injectors provided: full rail pressure, shot-to-shot consistency, injection timing
- Custom report tells you how it flows at idle, part & wide-open throttle conditions
- Exergy injectors contribute to a smoother running engine
- Nozzle flow balanced within 1% (+/-0.5%) across set
- Every set balanced within 4% at rated power
- EDM and/or Abrasive Flow Nozzles
Core Charge
Send your old injectors back to Exergy Performance. After a quality control inspection, your core charge will be refunded. We have separated the core charge out in our product bundle so you can clearly see the cost of injectors before and after this fee. The core charge is not optional, your injectors will not ship without this charge being collected.
Strongly Recommended Additions
6.7L High Pressure Feed Tubes
High-Pressure Feed Tubes from Exergy Performance replace the factory feed tubes that connect the fuel rail to the injectors. The stock feed tubes often leak after thousands of heat cycles which causes starting issues and no-start symptoms. These upgraded high-pressure feed tubes from Exergy Performance ensure your newly installed injectors get a good seal and are capable of flowing more fuel than their stock counterparts.
Warning: This product can expose you to chemicals that are known to the State of California to cause cancer. For more information, visit www.P65warnings.ca.gov