CMD +60% Exergy New Injectors (set of 6)

CMD +60% Exergy New Injectors (set of 6)

CME +30% Exergy New Injectors (set of 6)

CME +30% Exergy New Injectors (set of 6)

CMD Sportsman Exergy Reman Injectors (set of 6)

Exergy Sportsman injectors are the perfect upgrade for replacing failed stock injectors when you’re not planning on installing a turbo upgrade or adding other performance parts in the future. If you have done performance modifications (or intend to) consider the +30% injectors, + 60% injectors, or + 45% injectors. For your 6.7L CMD RAM 2500-5500 truck. Model years 2007, 2008, 2009.

 

As low as $2,988.00

In stock

SKU
DT1204000000A01
Customize CMD Sportsman Exergy Reman Injectors (set of 6)
Set of 6 CMC CMD Sportsman Exergy Reman Injector   + $2,988.00
None   + $0.00

* Required Fields

Your Customization
CMD Sportsman Exergy Reman Injectors (set of 6)
CMD Sportsman Exergy Reman Injectors (set of 6)

In stock

$2,988.00

Summary

    CMD Sportsman Exergy Reman Injectors (set of 6)

    You’ll have total peace of mind running the most reliable injectors ever offered for your CMD. From the top competitors in the industry to over-the-road hot shot drivers, diesel truck owners love Exergy Performance Injectors.

    Why buy Sportsman Injectors?

    • Replace Stock CMD Injectors
    • Have Stock Turbo and no plans to upgrade
    • Up to 600HP without causing smoke
    • No need to re-tune your vehicle after installation
    • If you have done performance modifications (or intend to) consider the +30% injectors, + 60% injectors, or + 45% injectors.

    Benefits of Remanufactured Exergy Performance Sportsman Injectors

    • Lower price than New, subject to limited inventory
    • Returned Injectors Remanufactured by Bosch
    • Exergy Performance: Top quality, high performance, most reliable
    • The only company we trust to modify injectors
    • Bosch equipment design & development for diesel common rail
    • Thorough verification & testing including shot-to-shot consistency and injection timing
    • Full test results of your injectors provided: full rail pressure, shot-to-shot consistency, injection timing
    • Custom report tells you how it flows at idle, part & wide-open throttle conditions
    • Exergy injectors contribute to a smoother running engine
    • Nozzle flow balanced within 1% (+/-0.5%) across set
    • Every set balanced within 4% at rated power
    • EDM and/or Abrasive Flow Nozzles

    Core Charge

    Send your old injectors back to Exergy Performance. After a quality control inspection, your core charge will be refunded. We have separated the core charge out in our product bundle so you can clearly see the cost of injectors before and after this fee. The core charge is not optional, your injectors will not ship without this charge being collected.

    Strongly Recommended Additions

    6.7L High Pressure Feed Tubes

    High-Pressure Feed Tubes from Exergy Performance replace the factory feed tubes that connect the fuel rail to the injectors. The stock feed tubes often leak after thousands of heat cycles which causes starting issues and no-start symptoms. These upgraded high-pressure feed tubes from Exergy Performance ensure your newly installed injectors get a good seal and are capable of flowing more fuel than their stock counterparts.

    Warning: This product can expose you to chemicals that are known to the State of California to cause cancer. For more information, visit www.P65warnings.ca.gov