Adjustable Pulling Hitch 2.5″

The BigChevyHitch.com adjustable pulling hitches are made to take the rigors of pulling for years to come.

These hitches will help to get your hitch height as high as possible to get those extra inches on the track.

The adjustable pin in place ring can be flipped over to provide different levels of height adjustment.  Offering over 8″ of rise or drop from the center of the receiver tube and 12 different height positions to make sure the hook point on the truck is as high as the rules will allow.

The shank that slides in to the receiver tube is made from 2 1/2″ cold rolled solid steel bar and the upright is made out of 2 1/2″ hot rolled steel bar with precision drilled holes to allow the pins to slide in and out easily without a lot of slop that can cause hopping issues or weird noises while going down the track.

The hitch ring is cut from 1 1/4″ solid steel plate to regulation size with a 3.75″ x 3″ oblong hole to fit all sled pulling sleds hooks.

*Does not have receiver pin hole drilled.